web
You’re offline. This is a read only version of the page.
close
Bose
Bose
  • English
    • English
    • 日本語
    • 中文(中国)
  • Home
  • ControlSpace ESP-880A

ControlSpace ESP-880A

  • Chirping or Other Audio Artifacts Heard From ControlSpace Processor

    Chirping or Other Audio Artfacts Heard From ControlSpace Processor

  • ControlSpace CC-64 Will Not Show Selected Parameter Set

    This article provides information about a known issue and an available workaround

  • ControlSpace Designer Firmware Chart

    This article contains information about the firmware files that are packaged with each version of ControlSpace Designer software.

  • ControlSpace ESP Has Red LED When Using ControlSpace Designer v5.1.1/v5.2 and GPI Programming

    This article gives you information about a ControlSpace error. It can appear only with versions 5.1.1 and 5.2.

  • Performing a Firmware Update Using ControlSpace Designer

    This article guides you how make a Firmware Update with the ControlSpace Designer software

  • Programming a ControlSpace CC-64

    This article outlines the basic procedure for programming a ControlSpace CC-64 panel with user controls in a ControlSpace program.

  • Remapping a ControlSpace CC-16

    Programming a ControlSpace CC-16 to Control Multiple Gains

  • Serial Over IP Settings

    Serial Over IP settings for controlling processors, PowerMatch, and PowerShare (Dante model) with a 3rd party controller and Serial Over Ethernet (UDP) settings for controlling endpoints

  • Setting a ControlSpace Processors Serial Port Settings in ControlSpace Designer

    This article walks through the process of changing the serial port settings of ESP and EX processors

  • Setting Up a ControlCenter CC-1 With an ESP/EX Processor

    This article explains how to assign volume control to the ControlCenter CC-1 within ControlSpace Designer.

  • Setting Up a ControlCenter CC-2 With an ESP/EX Processor

    How to configure a ControlCenter CC-2 with an ESP/EX processor

  • Setting Up a ControlCenter CC-3 With an ESP/EX Processor

    This article explains how to assign volume control to the ControlCenter CC-3 within ControlSpace Designer and how to wire the GPI port.

  • Setting Up Fire Alarm Mute on a ControlSpace ESP/EX Processor

    This article describes one method of creating a system mute state using the GPI terminals on select Bose Professional processors.

  • The Difference Between Scanning and Going Online in ControlSpace Designer

    This article explains the main differences between using the Scan and Go Online functions

  • Tips for Wiring a ControlSpace CC-16

    General tips for wiring a CC-16

  • Troubleshooting ControlSpace Connection Issues

    This article is a general guide for how to find a device by IP when it is not discoverable in Hardware Manager.

  • Using RS232 to Retrieve a ControlSpace Processor's IP Address

    How to retrieve a ControlSpace Processor's IP Address via RS232

  • Using Wireshark to Find an IP Address

    Two methods for using Wireshark to locate Bose hardware are presented.

  • Using the RS-232 Serial Port (ESP and EX only)

    This Article describes how to use the RS232 Port from a ESP/EX in combination with a Terminal Program at your PC

  • Set/Get IP Address (IP) from an ESP series processor

    This article describes how to discover the IP address of an ESP series processor by using the RS232 port.

  • Maximum number of SoIP connections for a DSP or a Amp

    This article describes how many Serial over IP Connections are possible to a ControlSpace ESP/EX or a networked amplifier

  • Audio Routes in the ControlSpace Designer Software

    This article describes how to use the Audio Route Function in the ControlSpace Designer Software

Looking for more information?

Contact us Learning Center

Bose               © Bose Professional