You’re offline. This is a read only version of the page.
This article describes the AEC processing object in Bose Conferencing processors, including input and output ports, inside algorithms,
An explanation of the basics behind AEC and why it is important in a conference room.
The control panel for the Acoustic Echo Cancellation (AEC) object allows the user to control and monitor the AEC object.
General guide to AEC processing with EX-1280C, EX-440C, and EX-12AEC using ControlSpace Designer.
In this article, we introduce the AEC Reference block.
Description of each item in the AMM-Gain Sharing control panel.
The control panel of the Gated Automatic Microphone Mixer provides control and monitoring for the AMM’s inputs and output as well as control of the way the AMM’s gates perform.
Chirping or Other Audio Artfacts Heard From ControlSpace Processor
This article provides information about a known issue and an available workaround
This article contains information about the firmware files that are packaged with each version of ControlSpace Designer software.
This article gives you information about a ControlSpace error. It can appear only with versions 5.1.1 and 5.2.
This article describes the modes in which PowerMatch, EX and PowerShare devices can be configured.
How to enable Dante and endpoint control within ControlSpace Designer
This article outlines the basic procedure for programming a ControlSpace CC-64 panel with user controls in a ControlSpace program.
Programming Philosophy for Open Architecture Digital Signal Processors - Working from the Outside In
How to restore the factory settings from the front panel when the ControlSpace EX processor does not start properly.
Serial Over IP settings for controlling processors, PowerMatch, and PowerShare (Dante model) with a 3rd party controller and Serial Over Ethernet (UDP) settings for controlling endpoints
This article walks through the process of changing the serial port settings of ESP and EX processors
How to set the IP address for Dante-enabled devices, including Dante expansion cards and Dante end points
This article explains how to assign volume control to the ControlCenter CC-1 within ControlSpace Designer.
How to configure a ControlCenter CC-2 with an ESP/EX processor
This article explains how to assign volume control to the ControlCenter CC-3 within ControlSpace Designer and how to wire the GPI port.
This article describes one method of creating a system mute state using the GPI terminals on select Bose Professional processors.
How to set up and manage VoIP on EX-1280C/440C
This article explains the main differences between using the Scan and Go Online functions
How to retrieve a ControlSpace Processor's IP Address via RS232
Two methods for using Wireshark to locate Bose hardware are presented.
This article describes the steps to import Bose Dante firmware files into Audinate's Dante Updater for use in firmware updates.
Resolving Dante firmware update issues when upgrading multiple products
This Article describes how to use the RS232 Port from a ESP/EX in combination with a Terminal Program at your PC
This article describes how many Serial over IP Connections are possible to a ControlSpace ESP/EX or a networked amplifier
This Arcticle describes how to find the Dante Firmware Update Files at the used PC
This Arcticle describes how to find the ControlSpace Designer Sample Files at the used PC.
This article describes how to use the Audio Route Function in the ControlSpace Designer Software