You’re offline. This is a read only version of the page.
Cleaning the chassis vents of a PowerMatch amplifier
This article contains information about the firmware files that are packaged with each version of ControlSpace Designer software.
This article describes the modes in which PowerMatch, EX and PowerShare devices can be configured.
Manually setting the PowerMatch limiter processing block
How to access Recovery Mode for PowerMatch amplifiers to update firmware
This article guides you how make a Firmware Update with the ControlSpace Designer software
When using a PowerMatch amplifier to push 70V/100V (Hi-Z) speakers in single channel mode, you may see a fault indicator on the amplifier.
This article outlines the basic procedure for programming a ControlSpace CC-64 panel with user controls in a ControlSpace program.
This article describes the procedure for resetting a PowerMatch amplifier to factory default settings.
Serial Over IP settings for controlling processors, PowerMatch, and PowerShare (Dante model) with a 3rd party controller and Serial Over Ethernet (UDP) settings for controlling endpoints
This article discusses options for setting up a fire alarm mute using PowerMatch without the use of ControlSpace ESP or ControlSpace EX processors.
This article explains the main differences between using the Scan and Go Online functions
Two methods for using Wireshark to locate Bose hardware are presented.
This article describes the steps to import Bose Dante firmware files into Audinate's Dante Updater for use in firmware updates.
Information on the Limiter processing block of PowerMatch
This article describes how many Serial over IP Connections are possible to a ControlSpace ESP/EX or a networked amplifier
This article describes which Dante Update File you have to use for a PowerMatch Amplifier with Dante Card inside.