This article describes the usage of pan and tilt brackets with Panaray 402 Series II and Panaray 402 Series IV loudspeakers.

Relevant Product(s)

• Panaray 402 II
• Panaray 402 II 100V
• Panaray 402 II 100V 50W
• Panaray 402IV
• Panaray 402IV 100V 100W

Panaray 402 Series II

The 402II loudspeaker was installed on a wall using the WBP-4 Bi-Pivot Wall Bracket (pictured below) and four M8 x 1.25 threaded inserts on the rear and bottom of the loudspeaker enclosure. 

Additionally, the 402II could be suspended using the SB-4 Suspension Bracket (pictured below) and two M8 x 1.25 threaded inserts on the bottom of the loudspeaker enclosure.

Panaray 402 Series IV

The 402IV loudspeaker was installed on a wall using the RMUBRKT-1 Pan/Tilt Bracket for indoor applications, and the WBPWR-50 Pan/Tilt Bracket for outdoor applications (pictured below) and four M8 x 1.25 threaded inserts on the rear of the loudspeaker enclosure. These accessories are also utilized with other Bose Professional loudspeakers.

The same SB-4 Suspension Bracket used with the 402II was also used with the 402IV for indoor suspended applications, and deployed in the same manner.

Because of the differences in the hole patterns between the 402II and the 402IV, the RMUBRKT-1 and WBPWR-50 cannot be used with the older 402II loudspeakers.

NOTE: Both Panaray 402 Series II (402II) and Panaray 402 Series IV (402IV) have been discontinued by Bose Professional, along with their respective mounting accessories. Some of these accessories may still be available from Bose Professional on a one-off basis. Check with the local Bose Professional territory sales manager for more information.