This article shows how to send the ControlSpace Remote file to the client device.
 

Relevant Product(s)

• ControlSpace Remote

Table of Contents

Send the file via ControlSpace Remote Builder

Send the file via ControlSpace Admin

Procedure

Send the file via ControlSpace Remote Builder

Step 1: Open the ControlSpace Remote app, and set the app to Receive.

      

Note: If you see more than one IP address (for example, one for WLAN and one for LAN or Mobile Network), select the IP address in the same range as the physical ControlSpace Device.
Note: You can only receive the ControlSpace Remote file when the Receive Control Panel is open! Once the file is received (in the second step, below), the dialog box will close automatically

Step 2: Send the file via ControlSpace Remote Builder.

After creating your custom Control Panel Layout, save the file and send to ControlSpace Remote by using the Send to Mobile Device button.

Now enter the correct Mobile Device IP Address and click OK. The app on the mobile device will now receive the file.

 

Send the file via ControlSpace Admin

Step 1: Same as above - open the Receive Control Panel in the ControlSpace Remote app and keep it open.

Step 2: Send the file via ControlSpace Remote Admin.

Open the file in ControlSpace Remote Admin and send to ControlSpace Remote by using Send to Mobile Device button.

Now enter the correct Mobile Device IP Address and click OK. The app on the mobile device will now receive the file.