Views:

This article describes which Dante firmware file is required for use with ESP series processors with the optional Dante network card.

 

Relevant Product(s)

  • ControlSpace ESP-880
  • ControlSpace ESP-1240
  • ControlSpace ESP-1600
  • ControlSpace ESP-4120

 

Procedure

For all ESP series processors with the optional Dante network card installed, the same firmware file must be used. The firmware file will be installed alongside ControlSpace Designer, located in the program files directory, typically found here: C:\Program Files (x86)\Bose\ControlSpace 5.12\bin\Dante Firmware

The firmware file needed is: Bose_ESP-FixedIO_v3.0.1.0.dnt

Depending on the version of ControlSpace Designer installed, the version number may be slightly different.

Keywords: Dante, Dante Firmware Update; Firmware , Update, ESPLink Processor, Dante Card
Add a comment